This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Cart

Regina Chain - Low Maintenance (HPE)

$669.00

Say goodbye to everyday chain maintenance! In a world first, Italian manufacturer Regina has developed a revolutionary new High Performance Endurance (HPE) chain. The surfaces of the rollers and bushes in this rather special chain are coated with hydrogen-free, tetrahedral amorphous carbon, also referred to as "industrial diamond”. This coating reduces power loss and increases efficiency. What's more, the HPE chain requires almost no cleaning or lubrication. Extensive lab and street testing show the life of the new HPE chain is as good, if not greater, than a traditional regularly re-lubricated Z-Ring chain.

Regina HPE chain has a Tetrahedral Amorphous Carbon (ta-C) coating, currently considered as the most advanced among DLC (Diamond Like Carbon) coatings, applied on the surfaces of the bushings and the rollers, combining high hardness with a low coefficient of friction:

  • eliminates the need of periodic re-lubrication, while ensuring at least the same mileage obtained with a normal chain regularly lubricated every 500 km
  • reduces energy dissipation and increases efficiency in the chain drive
  • eliminates lubricant spatter during operation, minimizing environmental impact.

ta-C: The carbon coating closest to diamond
Pure Carbon is present in nature only in two crystalline physical states: Diamond (atoms in Tetrahedral bonding arrangement) and graphite (atoms in Hexagonal Planar bonding arrangement).  ta-C is a synthetic state of pure Amorphous Carbon in which up to 80% of the atoms are bonded to each other with a Tetrahedral arrangement, in the same way of pure Diamond. For this reason, among all so called “DLC” (Diamond Like Carbon) coatings, the physical properties of ta-C (such as hardness & coefficient of friction) are the closest to pure Diamond, which is the hardest material on Earth.

HPE Chain installation
A chain drive using an HPE Chain does not require ta-C coated front and rear sprockets. When installing a new HPE Chain, it is strongly recommended to replace front and rear sprockets with new ones. Sprockets must be made of steel.

HPE Chain maintenance, cleaning and tensioning
To guarantee its best functionality and aesthetics over time, follow 3 simple rules:

  • clean and re-lubricate the chain after washing your bike, after using your bike in wet conditions and /or in salty or dusty environments and before storing your bike at the end of the riding season (winter season)
  • re-lubricate the chain once a year
  • check correct chain tensioning every 3,000km. See www.reginachain.net - Chain Maintenance section, for detailed instructions.

Z-RING
An evolution of previous X-Ring and Z-Ring designs, the new generation Z-Ring seal has been patented since 2003 and features a specially-designed conical shape on the inner side. The Z-Ring flexes when assembled, creating a spring effect that guarantees the seal will not decrease over time. The special Z-Ring section provides enhanced chain flexibility while the conical section enhances assembly on the bushing. The lubricant trapped between the plates and the lobes of the Z-Ring keeps the ring lubricated and increases its life.

Regina HPE chain is only available in 525 pitch, pre-cut at 120 links and supplied with a Type 19 rivet link. Not available as bulk chain.

Shipping Once your payment has been confirmed, we make every effort to get your items to you as quickly as possible.

Our items are shipped from our Auckland-based storage facility or our shop, so please allow between 2-4 business days if you are in an urban area, and a little bit longer if you are a rural address.

We use NZCouriers and CourierPost as our shipping companies.

They cannot deliver to PO Boxes, and items must be signed for. If delivering to a company address, please ensure the company name is included in the address details. Please note: items purchased after 2.00pm may not be dispatched until the following business day.

Weekends and all public holidays are not classed as business days. Items purchased on non-business days will be processed on the first available business day.

If you are not 100% happy with your purchase, you can return it within 14 days of receipt for either an exchange, store credit or full refund of the price paid (less any shipping costs). Please adhere to the following conditions for returning your item:

- Items must be in new and saleable condition, with original packaging, labels, tags and all accessories intact

- Product packaging must be wrapped / protected before shipping to avoid damage. Do not stick anything to product packaging

- Items must be undamaged and unused

- Items must be returned freight paid (for your security, we recommend you use a courier that requires signature delivery)

- A note explaining the reason for return/exchange request and your contact details is sent with the item If you have any concerns about your return meeting these conditions, please contact us before sending, thereby avoiding unnecessary courier costs. Exchange Procedure If your original order qualified for freight free delivery, any additional exchanges on the same order will incur a freight charge.

Refund Policy Due to security measures, refunds will be processed back to the credit card or bank account used for the original payment. Refunds will be processed within 5 business days of receipt of the returned item. If an item needs to be returned due to a defect or warranty issue, please make contact with us and we will endeavour to sort it out for you.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Meticulously designed in the NZ.

Handmade, one stitch at a time with materials we know and trust, because that is how we do it. All of our products are hand made in the NZ and produced with the finest materials and craftsmanship.

LEARN MORE