Click & Collect or Delivery options available.
MOSFET Regulator with Bypass Tri Daytona/Street Triple 675
$355.99
Brand new RMSTATOR Red Machined aluminium MOSFET Bypass Regulator
The new red machined aluminium MOSFET bypass voltage regulator is a great upgrade for heat dissipation in any powersports charging system. After 10 minutes of use, The billet aluminium heatsink runs cooler by 33% than standard cast regulator housings. The new red regulator, equipped with the renowned MOSFET regulation technology, is an added value to any three-phase permanent magnet charging system.
STOP BURNING the REGULATOR RECTIFIER !It is time to update or replace the voltage regulator with the advanced MOSFET type.
It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up, it will simply turn off for a while and cool off.
- Direct replacement to the original unit
- Plug-and-play, direct fit, easy installation
- The quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components
- All shipped products are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
*All item pictures are accurate, if in doubt, do not hesitate and compare The item to the original part.
Why use MOSFET Enhanced technology?
Runs cooler
Runs much cooler than the traditional Shunt voltage regulator rectifier.
Saves gas
Less load on the stator, less work, less fuel is used and you save.
Regulated energy
The power charging the battery is steadier and smooth.
Ex tended battery life
Extends the battery’s life and cold cranking capacity.
More engine power
Removes stator load resulting in more engine power.
optimised power
optimise power delivery by switching the stator coils on or off.
How does a MOSFET regulator rectifier work?
With 
design
ABOUT THE BYPASS HARNESS
This bypass harness allows you to connect the new series regulator directly to the battery. Bypassing feet of wire and multiple connectors on the main wiring harness to provide a safer and more direct connection.
INSTALL LIKE A PROWe include the opposite connector (main harness side) as we know these are often melted / corroded / defective. Defective connectors are a major cause for repetitive electrical issues.
Before installing the new RMSTATOR Red Machined aluminium MOSFET Bypass Regulator :
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Dimensions:
Width: 95 mm
Length: 90 mm
Height: 30 mm
Wires length: 811 mm and 350 mm
Fixation holes centre to centre: 75 mm
Other specifications:
Number of plugs: 2
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5 V +/- 0.5 V
Maximum Charging Current: 50 A / 500 W
Open Circuit Voltage: < 15 V
Operation Temperature: -20°C to 85°C
Shipping Once your payment has been confirmed, we make every effort to get your items to you as quickly as possible.
Our items are shipped from our Auckland-based storage facility or our shop, so please allow between 2-4 business days if you are in an urban area, and a little bit longer if you are a rural address.
We use NZCouriers and CourierPost as our shipping companies.
They cannot deliver to PO Boxes, and items must be signed for. If delivering to a company address, please ensure the company name is included in the address details. Please note: items purchased after 2.00pm may not be dispatched until the following business day.
Weekends and all public holidays are not classed as business days. Items purchased on non-business days will be processed on the first available business day.
If you are not 100% happy with your purchase, you can return it within 14 days of receipt for either an exchange, store credit or full refund of the price paid (less any shipping costs). Please adhere to the following conditions for returning your item:
- Items must be in new and saleable condition, with original packaging, labels, tags and all accessories intact
- Product packaging must be wrapped / protected before shipping to avoid damage. Do not stick anything to product packaging
- Items must be undamaged and unused
- Items must be returned freight paid (for your security, we recommend you use a courier that requires signature delivery)
- A note explaining the reason for return/exchange request and your contact details is sent with the item If you have any concerns about your return meeting these conditions, please contact us before sending, thereby avoiding unnecessary courier costs. Exchange Procedure If your original order qualified for freight free delivery, any additional exchanges on the same order will incur a freight charge.
Refund Policy Due to security measures, refunds will be processed back to the credit card or bank account used for the original payment. Refunds will be processed within 5 business days of receipt of the returned item. If an item needs to be returned due to a defect or warranty issue, please make contact with us and we will endeavour to sort it out for you.