This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Cart

Stock not held in store.
Click & Collect or Delivery options available.

Stator & Regulator Upgrade Kit Suzuki DRZ400

$769.99

Brand-new aftermarket Reliability Upgrade Kit 200W Stator + Series Voltage Regulator.

Features:

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • Highest grade of lamination materials.
  • Highest grade of copper winding, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included.
  • Connectors included.
  • Rubber grommet included.
  • All products shipped are tested.

20% more output over stock; works with all other OEM components.

RM Stator even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Benefits of Series Voltage Regulators

SERIES regulators run much cooler than the Shunt and MOSFET voltage regulator rectifiers and are way cooler than OEM parts.

Power only flows through the electrical components when the battery is charging.

Allows the stator to have lower current flowing when not used, extending its lifetime.

The regulator is easier to mount because it is smaller than the OEM.

About the Series Voltage Regulation Technology

RMSTATOR’s new SERIES voltage regulator brings better reliability and charging system performance. A SERIES regulator is a significant upgrade over typical shunt-type voltage regulators.

A shunt regulator controls battery voltage by grounding the stator coils to dissipate current as heat, rather than sending it on to the battery. SERIES regulators control battery voltage by intermittently disconnecting stator coils from the regulator electronics, limiting current flow through the unit and on to the battery completely.

This results in lower regulator and stator temperatures, more accurate voltage regulation, and increased reliability of your charging system components.

About the Bypass Harness

This bypass harness allows you to connect your new series regulator directly to your battery. Bypassing feet of wire and multiple connectors on your main wiring harness to provide a safer and more direct connection.

Stator :

Stator Dimensions:

  • Interior diameter: 35 mm
  • Exterior diameter: 93 mm
  • Thickness: 16 mm
  • Length of wires stator to grommet: 140 mm
  • Length of wires grommet to plug: 540 mm and 670 mm
  • Length of pickup coil's wire to grommet: 110 mm

Other specifications:

  • Number of wires: 7
  • Number of plugs: 2
  • Number of pins: 7
  • Number of poles: 18

Wire to wire resistance:

  • Alternator: Yellow to Yellow = 0.6 ohms +/-20%
  • Alternator: Yellow to ground = O.L
  • Pickup: Blue to Green = 445 ohms +/-20%
  • Position Sensor: Black to White = 0.2 ohms +/-20%

Series Regulator :

Dimensions

  • Width: 84 mm
  • Length: 90 mm
  • Height: 32 mm
  • Fixation holes centre-to-centre: 69 mm

Other specifications

  • Number of plugs: 2
  • Number of pins: 5
  • Minimum Charging Voltage: 14.5 V +/- 0.5 V
  • Maximum Charging Current: 50 A / 500 W
  • Open Circuit Voltage: < 15 V
  • Operation Temperature: -20°C to 85°C

Bypass Harness :

Dimensions

  • Wires length: 640 mm
  • Number of plugs: 3
  • Number of pins: 5
  • Number of wires: 5

Brand-new aftermarket Reliability Upgrade Kit 200W Stator + Series Voltage Regulator.

Features:

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • Highest grade of lamination materials.
  • Highest grade of copper winding, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included.
  • Connectors included.
  • Rubber grommet included.
  • All products shipped are tested.

20% more output over stock; works with all other OEM components.

RM Stator even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Benefits of Series Voltage Regulators

SERIES regulators run much cooler than the Shunt and MOSFET voltage regulator rectifiers and are way cooler than OEM parts.

Power only flows through the electrical components when the battery is charging.

Allows the stator to have lower current flowing when not used, extending its lifetime.

The regulator is easier to mount because it is smaller than the OEM.

About the Series Voltage Regulation Technology

RMSTATOR’s new SERIES voltage regulator brings better reliability and charging system performance. A SERIES regulator is a significant upgrade over typical shunt-type voltage regulators.

A shunt regulator controls battery voltage by grounding the stator coils to dissipate current as heat, rather than sending it on to the battery. SERIES regulators control battery voltage by intermittently disconnecting stator coils from the regulator electronics, limiting current flow through the unit and on to the battery completely.

This results in lower regulator and stator temperatures, more accurate voltage regulation, and increased reliability of your charging system components.

About the Bypass Harness

This bypass harness allows you to connect your new series regulator directly to your battery. Bypassing feet of wire and multiple connectors on your main wiring harness to provide a safer and more direct connection.

Stator :

Stator Dimensions:

  • Interior diameter: 35 mm
  • Exterior diameter: 93 mm
  • Thickness: 16 mm
  • Length of wires stator to grommet: 140 mm
  • Length of wires grommet to plug: 540 mm and 670 mm
  • Length of pickup coil's wire to grommet: 110 mm

Other specifications:

  • Number of wires: 7
  • Number of plugs: 2
  • Number of pins: 7
  • Number of poles: 18

Wire to wire resistance:

  • Alternator: Yellow to Yellow = 0.6 ohms +/-20%
  • Alternator: Yellow to ground = O.L
  • Pickup: Blue to Green = 445 ohms +/-20%
  • Position Sensor: Black to White = 0.2 ohms +/-20%

Series Regulator :

Dimensions

  • Width: 84 mm
  • Length: 90 mm
  • Height: 32 mm
  • Fixation holes centre-to-centre: 69 mm

Other specifications

  • Number of plugs: 2
  • Number of pins: 5
  • Minimum Charging Voltage: 14.5 V +/- 0.5 V
  • Maximum Charging Current: 50 A / 500 W
  • Open Circuit Voltage: < 15 V
  • Operation Temperature: -20°C to 85°C

Bypass Harness :

Dimensions

  • Wires length: 640 mm
  • Number of plugs: 3
  • Number of pins: 5
  • Number of wires: 5

Shipping Once your payment has been confirmed, we make every effort to get your items to you as quickly as possible.

Our items are shipped from our Auckland-based storage facility or our shop, so please allow between 2-4 business days if you are in an urban area, and a little bit longer if you are a rural address.

We use NZCouriers and CourierPost as our shipping companies.

They cannot deliver to PO Boxes, and items must be signed for. If delivering to a company address, please ensure the company name is included in the address details. Please note: items purchased after 2.00pm may not be dispatched until the following business day.

Weekends and all public holidays are not classed as business days. Items purchased on non-business days will be processed on the first available business day.

If you are not 100% happy with your purchase, you can return it within 14 days of receipt for either an exchange, store credit or full refund of the price paid (less any shipping costs). Please adhere to the following conditions for returning your item:

- Items must be in new and saleable condition, with original packaging, labels, tags and all accessories intact

- Product packaging must be wrapped / protected before shipping to avoid damage. Do not stick anything to product packaging

- Items must be undamaged and unused

- Items must be returned freight paid (for your security, we recommend you use a courier that requires signature delivery)

- A note explaining the reason for return/exchange request and your contact details is sent with the item If you have any concerns about your return meeting these conditions, please contact us before sending, thereby avoiding unnecessary courier costs. Exchange Procedure If your original order qualified for freight free delivery, any additional exchanges on the same order will incur a freight charge.

Refund Policy Due to security measures, refunds will be processed back to the credit card or bank account used for the original payment. Refunds will be processed within 5 business days of receipt of the returned item. If an item needs to be returned due to a defect or warranty issue, please make contact with us and we will endeavour to sort it out for you.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)